Tips

It turns out that it’s not difficult to clean a clogged radiator or clogged radiator or clogged radiator. How do you service a car radiator yourself?

The material and process for servicing the car radiator itself are quite easy. The tools used are simple, easy to get and the price is cheap, the process is not too complicated.

Before starting to do a guide on how to service a car radiator yourself, you need to know the parts of the radiator. There are three important parts to the radiator, namely the upper tank (top tank), lower water tank, and the core tank which is the core part of the car radiator.

How to Service Your Own Car Radiator

Usually, the cause of a damaged, clogged, or clogged car radiator is the age of the vehicle and the use of inappropriate water, such as lime water, well water, or it could be because the radiator water is rarely replaced. Here’s how to service a car radiator.

  1. Prepare the necessary materials
    Prepare the materials needed to clean the car radiator, namely gallon water, radiator coolant or special fluid for radiators, and liquid to clean radiators.

You can clean the radiator core using radiator coolant, radiator super coolant, or antifreeze coolant protector. This special radiator water is considered the most suitable for cleaning the build-up of scale on the radiator compared to ordinary water.

Moreover, if the vehicle often overheats, then the radiator coolant, radiator super coolant, and antifreeze, and coolant protector have a high boiling point compared to ordinary water to provide optimal cooling for your car. However, if you are used to using plain water, it is also not a problem.

  1. Drain radiator water
    Before draining the car radiator, make sure the car is cold. Opening the radiator tank cap when the engine is hot is very dangerous. There is an easy way to drain or clean the radiator. Do it when the water volume has shown at the lower tank point or the bottom of the tank.

How to empty the radiator water is to open the faucet under the radiator tank. Radiator water must be completely drained, there should be no residue. Drain the radiator water can also be done through the radiator water hose at the bottom. The trick, the hose is removed first. The use of this hose can expedite the flow of water.

  1. Clean the radiator water hose
    A car radiator component that is no less important to clean is the radiator water hose. It’s useless if the radiator is clean, but the hose is still dirty. This dirty hose can cause crust on the car engine. So, one way to service a car radiator is to clean the radiator water hose.

How to clean the radiator hose is to remove the hose and then spray water into it. Do this until no dirt remains in the hose.

  1. Clean the radiator core
    After cleaning the radiator hoses, the next step is to clean the radiator core. The core tank or radiator core can be done by filling the water in the radiator until the output water is clean water.

To clean this core, you must use a clean radiator hose. You can clean the radiator core using radiator coolant, radiator super coolant, or antifreeze coolant protector. However, if you don’t find radiator coolant, you can use regular gallons of water.

Note: Avoid using well water or groundwater which has a high lime content because it will rust more quickly.

  1. Start the car engine to drain the radiator water
    After the tank cap is installed again, then start the car engine to clean the car radiator. Warm up the engine for about 15 minutes. Wait until the thermostat rises to the middle position until the radiator water that comes out is smooth and clear. If it is completely empty, turn off the machine again.
  2. Repeat radiator cleaning
    If the engine is cold, then refill the radiator until it is full. Then close the tank. Restart the engine until the radiator water drains out. Repeat this step two to three times to make sure that there is no scale adhering to the radiator. This is done so that the remaining cleaning fluid can also be lifted through the radiator output water.
  3. Close the faucet, reinstall the hose, and check the condition of the radiator
    When the radiator is clean, you can close the faucet again and attach the hose. Then, refill the radiator with radiator water. Add a little radiator coolant so that the quality of the water flowing into the engine can be better and last longer because it prevents scale build-up.

After that, you can close the tank and restart the car engine. Heat a few moments. After that, turn off the engine and check the condition of the radiator again. If the water is reduced, then do not add water, but add radiator coolant.

Car Radiator Caring Tips
If you already know how to serve

You Want To Have Your Favorite Car?

We have a big list of modern & classic cars in both used and new categories.